Register
A material condition used to indicate that a specified geometric tolerance applies at each increment of size of a feature within its limits of size is called ___.
2.2k views
0 votes
A material condition used to indicate that a specified geometric tolerance applies at each increment of size of a feature within its limits of size is called ___.

User Akshay Chandran
by
6.6k points

1 Answer

2 votes

Answer: Regardless of feature size (RFS)

Step-by-step explanation:

It is a pre-selected condition for every geometric tolerance which is the second rule of GD&T and it requires no repairs, it is adopted when size feature has no effect on defined tolerance. RFS implies that GD&T callout is not dependent on size dimension. Least Material Condition (LMC) cancels out this rule.

•Reasons for using RFS.

1. It can not be easily determined.

2. It can be used anytime but can be ignored if it is specified.

User Jayanti Lal
by
5.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.5m questions

8.6m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
Where are all the controls on most circuits?
Link Copied!