Register
5. If you designed a part with an overall width dimension of 1.250 inches and printed it on the same 3D printer using the same filament, what would you predict the width of the printed part would measure?
156k views
2 votes
5. If you designed a part with an overall width dimension of 1.250 inches and printed it on the same 3D printer using the same filament, what would you predict the width of the printed part would measure?

6. If the width of your part had to measure between 1.220 inches and 1.255 inches to operate properly, would you adjust the width dimension of your CAD model to improve the chances of the 3D-printed model being within these limits? Explain your reasoning.

5. If you designed a part with an overall width dimension of 1.250 inches and printed-example-1
User Baskaran
by
8.2k points

1 Answer

5 votes

Answer:

let us start by stating the definitions of Time series data and Cross sectional data. TIME SERIES DATA: The data which is collected chronologically over time is known as time series data.

User Isla
by
8.7k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!