Register
By using hydraulic cylinders of the hydraulic forces can be increased or decreased. Select one: a. Twice the size of the piston b. Same sizes c. Different sizes d. The same size as the piston
117k views
3 votes
By using hydraulic cylinders of

the hydraulic forces can be increased or decreased.
Select one:
a. Twice the size of the piston
b. Same sizes
c. Different sizes
d. The same size as the piston

User John Stud
by
5.7k points

1 Answer

7 votes

Answer:

C

Step-by-step explanation:

Hydraulic systems can increase or decrease the force applied to them. To make the force larger, the pressure is applied to a larger area. For example, if a 100-N force is applied to the left cylinder in (Figure) and the right cylinder has an area five times greater, then the output force is 500 N.

User Seba Cherian
by
6.7k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

6.7m questions

9.0m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!