Register
Marcus is a structural engineer assigned to the construction of a new recycling facility, along with an industrial engineer, mechanical engineer, and architectural engineer, as well as a chief architect
187k views
3 votes
Marcus is a structural engineer assigned to the construction of a new recycling facility, along with an industrial engineer,

mechanical engineer, and architectural engineer, as well as a chief architect with two apprentices. Which of the
following project aspects is it most critical for Marcus to focus on?
O analysis of the machinery needed to run the facility
analysis of what systems are necessary to support the recycling process
O analysis of the load-bearing requirements of the facility
O analysis of how to best match the building plans to the facility work flow

User Vasyl Zhuryk
by
7.8k points

1 Answer

4 votes

Answer:

analysis of the load-bearing requirements of the facility

Step-by-step explanation:

User ADoN
by
7.2k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.6m questions

11.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!