Step-by-step explanation:
Specific heat capacity
Heating materials
When materials are heated, the molecules gain kinetic energy and start moving faster. The result is that the material gets hotter.
Temperature is a measure of the average kinetic energy of the molecules.
Different materials require different amounts of energy to change temperature. The amount of energy needed depends on:
the mass of the material
the substance of the material (specific heat capacity)
the desired temperature change
It takes less energy to raise the temperature of a block of aluminium by 1°C than it does to raise the same amount of water by 1°C. The amount of energy required to change the temperature of a material depends on the specific heat capacity of the material.
Heat capacity
The specific heat capacity of water is 4,200 Joules per kilogram per degree Celsius (J/kg°C). This means that it takes 4,200 J to raise the temperature of 1 kg of water by 1°C.
Some other examples of specific heat capacities are:
Brick840Copper385Lead129
Lead will warm up and cool down fastest because it doesn’t take much energy to change its temperature. Brick will take much longer to heat up and cool down. This is why bricks are sometimes used in storage heaters as they stay warm for a long time. Most heaters are filled with oil (1,800 J/kg°C) or water (4,200 J/kg°C) as these emit a lot of energy as they cool down and, therefore, stay warm for a long time.
The specific heat capacity of a material is the energy required to raise one kilogram (kg) of the material by one degree Celsius (°C).
Calculating thermal energy changes
The amount of thermal energy stored or released as the temperature of a system changes can be calculated using the equation:
change in thermal energy = mass × specific heat capacity × temperature change
ΔEt=m×c×ΔΘ
This is when:
change in thermal energy (ΔEt) is measured in joules (J)
mass (m) is measured in kilograms (kg)
specific heat capacity (c) is measured in joules per kilogram per degree Celsius (J/kg°C)
temperature change (∆θ) is measured in degrees Celsius (°C)
Example
Sadie is experimenting with a model steam engine. Before the 0.25 kg of water begins to boil it needs to be heated from 20°C up to 100°C. If the specific heat capacity of water is 4,180 J/kg°C, how much thermal energy is needed to get the water up to boiling point?
Et=m c Δθ
Et=0.25×4,180×(100−20)
Et=0.25×4,180×80
Et=83,600 J