Register
The small piston of a hydraulic lift has a crosssectional area of 2.87 cm2 and the large piston 314 cm2 . What force must be applied to the small piston for the lift to raise a load of 2.4 kN
43,385 views
21 votes
21 votes
The small piston of a hydraulic lift has a crosssectional area of 2.87 cm2 and the large piston 314 cm2 . What force must be applied to the small piston for the lift to raise a load of 2.4 kN

User Twoleggedhorse
by
2.7k points

1 Answer

20 votes
20 votes

Answer:

P1 = P2 pressure is uniform

F1 / A1 = F2 / A2

F1 = F2 (A1 / A2) = 2,400 N * (2.87 / 314) = 21.9 N

User NovicePrgrmr
by
2.9k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

1.6m questions

2.0m answers

Other Questions

Determjne the density of liquid whose relative density is 1.25 given that the density is 1000kgm-3​
After a light turns green , Lesly accelerates to 120 km/hr over 100 meters . What is her acceleration in m/s^2
If a constant fotce of 490 newtons is applied to an object and it proceeds to accelerate in the opposjte direction at 9.8 meters per second, every second, what is its mass?
How can I solve the following? In (Figure 1), let V = 15.0 V and C1=C2=C3= 24.2 μF. Part A: How much energy is stored in the capacitor network as shown in (Figure 1)? Part B: How much energy would be stored
1. if i start with 48 ml of water in a graduated cylinder, after submerging an object the water level rises to 63 ml, what is the volume of the object. 2. if i start with 36 ml of water in a graduated
Link Copied!