Register
An electric kettle is required to heat 0.64 kg of water from 15.4°C to 98.2°C in six minutes. The supply voltage is 220 V and the efficiency of the kettle is 85.5%. Assume the specific heat capacity of
47.5k views
2 votes
An electric kettle is required to heat 0.64 kg of water from 15.4°C to 98.2°C in six

minutes. The supply voltage is 220 V and the efficiency of the kettle is 85.5%.
Assume the specific heat capacity of water to be 4.187 kJ/kg.K. Calculate the
resistance of the heating element.​

User Rami Assi
by
8.0k points

1 Answer

7 votes

Answer:

Almost done

Step-by-step explanation:

I am just finishing up my work

User Mayur Kukadiya
by
8.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.1m answers

Other Questions

A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!