Question

A single output device has failed while the remainder of the PLC system is functioning normally The indicator light on the output module indicates that a signal is sent to the output point where the device is connected. You would now:

a) trace the circuit back through the logic to locate the inputs.

b) use a programming terminal to call up the rung that controls the output to see if the output coil is on.

c) check the point where the output device's field wiring is connected to the output rack.

d) check the input modules for short-circuit conditions.

Answer 1

check the point where the output device's field wiring is connected to the output rack. ( C )

Step-by-step explanation:

Given that an indicator light on the output module is indicating that a signal has been sent to the output point where the failed single output device is connected , the best line of action to properly indicate the output device that has filed in the PLC system, is to check the point where the output device's field wiring is connected to the output rack in the PLC system.

A PLC system is a computer control system ( especially Industrial ) that helps in the monitoring the states of input and output devices in an industry.