Register
A 4-m-high and 6-m-long wall is constructed of twolarge 2-cm-thick steel plates (k 5 15 W/m·K) separated by1-cm-thick and 20-cm wide steel bars placed 99 cm apart. Theremaining space between the steel
62.5k views
4 votes
A 4-m-high and 6-m-long wall is constructed of twolarge 2-cm-thick steel plates (k 5 15 W/m·K) separated by1-cm-thick and 20-cm wide steel bars placed 99 cm apart. Theremaining space between the steel plates is filled with fiber-glass insulation (k 5 0.035 W/m·K). If the temperature dif-ference between the inner and the outer surfaces of the wallsis 22°C, determine the

User Max Markov
by
3.1k points

1 Answer

2 votes

Answer:

fart

Step-by-step explanation:

User Scniro
by
3.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

3.3m questions

4.2m answers

Other Questions

Implement this C program by defining a structure for each payment. The structure should have at least three members for the interest, principle and balance separately. And store all the payments in a structure
The steady-state data listed below are claimed for a power cycle operating between hot and cold reservoirs at 1200 K and 400 K, respectively. For each case, evaluate the net power developed by the cycle,
Regulation 433.3.3 gives six examples where th are permitted for safety reasons. Can you fill in the missing words? Exciter Drop zone for rotating machines. Supply circuits of lifting Dron zone
A machine component is subjected to an axial load that varies from 3000 lb compression to 5000 lb tension. Determine the combination of maximum and minimum stresses to which the member could probably be
Engine oil flows through a 25‐mm‐diameter tube at a rate of 0.5 kg/s. The oil enters the tube at a temperature of 25°C, while the tube surface temperature is maintained at 100°C. For a 100‐m long tube,
Link Copied!