Register
The operating sequence to light the main burners on an intermittent pilot system is:______.
155k views
3 votes
The operating sequence to light the main burners on an intermittent pilot system is:______.

User Ospahiu
by
7.0k points

1 Answer

5 votes
The pilot valve and spark igniter are energized, the pilot flame is proved, and then the main gas valve is energized.
User JohnS
by
6.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

7.4m questions

9.9m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
Where are all the controls on most circuits?
Link Copied!