Register
) In a disk test performed on a specimen 32-mm in diameter and 7 mm thick, the specimen fractures at a stress of 680 MPa. What was the load on the disk at fracture
159k views
21 votes
) In a disk test performed on a specimen 32-mm in diameter and 7 mm thick, the specimen fractures at a stress of 680 MPa. What was the load on the disk at fracture

User Vinayagam
by
6.8k points

1 Answer

6 votes

Answer:

Sorry it doesnt tall me anythikng

Step-by-step explanation:

User Dolly Aswin
by
7.9k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

7.8m questions

10.4m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!