Register
Design a column to support a factored axial load of 1950kN. The column has an effective length of 6m with respect to y-axis and 4m with respect to x-axis?
106k views
17 votes
Design a column to support a factored axial load of 1950kN. The column has an effective length of 6m

with respect to y-axis and 4m with respect to x-axis?

User Labs
by
6.9k points

1 Answer

10 votes

Answer: eccentricity of loading with respect to the centroid. - Member out-of ... columns. Figure 1. Buckling of axially loaded compression members. • The critical ... Effective length for minor (y) axis buckling = Ky Ly = 1.0 x 20 = 20 ft. = 240 in. Step III. ... Column AB has a design factor load Pu = 450 kips

Step-by-step explanation:

User Bolt Thunder
by
6.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

7.8m questions

10.5m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!