Register
25 In differential aeration corrosion, rich oxygenated parts are (a) anodic(b)cathodic (c) protected (d) none of above 26 To eliminate entrapment of moisture, it is advised to (a) make corners smooth (b)
136k views
17 votes
25 In differential aeration corrosion, rich oxygenated parts are

(a) anodic(b)cathodic
(c) protected (d) none of above
26
To eliminate entrapment of moisture, it is advised to
(a) make corners smooth
(b) coat the containers
(c) use corrosion resistant alloy, like cupro-nickel (d) provide a drainage hole
27 Storage containers should be designed in such a way that
(a) No crevices are formed
(b) No obstacle to drainage occurs
(c) The design should ensure that the containers are drained in minimum time
(d) the containers should be constructed from plastics rather than metals or allows
28 The corrosion resistance of metals, such as stainless steels and copper alloys.
depends upon the buildup of uniform surface films. Which one of the following
would require a maximum attention of the designer?
(a) Accessibility of oxygen in the operating medium.
(b) Coating of the metal
(c)The drainage capability of the vessel (d)
The period of storage of the liquid in the container​

User Karthik Bose
by
5.2k points

1 Answer

9 votes

Answer:what are you trying to say

Step-by-step explanation:

User Shamina
by
5.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

5.8m questions

7.5m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Link Copied!