Question

A wall erected on a concrete slab with a 8'-1" ceiling height using 2 × 6 stock with 5/8" gypsum board ceiling requires studs with a length of _____ .

Answer 1

To find the stud length, convert the ceiling height to inches and subtract the thickness of any additional material. For a ceiling 8'-1" high with 5/8" gypsum board, the studs should be 93 3/8 inches long after accounting for the ceiling height and the thickness of the bottom and top plates.

Step-by-step explanation:

The length of the studs required for a wall on a concrete slab with a ceiling height of 8'-1" using 2 × 6 stock with 5/8" gypsum board ceiling can be determined by accounting for the ceiling height and the combined thickness of materials.

Since the ceiling height is 8 feet 1 inch, you would first convert this to inches, which is 97 inches (8 feet × 12 inches/foot + 1 inch). Then, you need to subtract the thickness of the 5/8 inch gypsum board. However, in typical construction practices, you may also need to account for the thickness of the bottom and top plates (each 2 × 6, usually 1.5 inches each after finishing), which are part of the framing structure and to which the vertical studs are attached.

Calculating the required length of the studs:
97 inches (total ceiling height) - 1.5 inches (bottom plate) - 1.5 inches (top plate) - 5/8 inches (gypsum board) = 93 3/8 inches. So the studs would need to be 93 3/8 inches long to fit properly.

Answer 2

A wall erected on a concrete slab with an 8' 1" ceiling height using 2 × 6 stock with 5/ 8" gypsum board ceiling requires studs with a length of 94.875 inches.

To determine the length of the studs for the wall with an 8' 1" ceiling height using 2 × 6 stock and a 5/8" gypsum board ceiling, consider the following:

Ceiling Height:

- Ceiling height is given as 8 feet and 1 inch.

- Convert this to inches: 8 (12 + 1) = 97 inches.

Thicknesses:

- Thickness of the 2 × 6 stock: 1.5 inches (the actual thickness of a 2 × 6).

- Thickness of the gypsum board ceiling:
`(5)/(8)` inch.

Calculate Stud Length:

- The total stud length is the ceiling height minus the thicknesses of the 2 × 6 stock and the gypsum board ceiling.

- Stud Length = 97 inches - 1.5 inches -
`(5)/(8)` inch = 94.875 inches

To determine the length of the studs required, we need to consider the height of the ceiling and the thickness of the ceiling materials. In this scenario, the ceiling height is 8 feet 1 inch, which is equivalent to 97 inches.

To calculate the length of the studs, we subtract the total thickness of the ceiling materials from the ceiling height: 97 inches - 2.125 inches = 94.875 inches.

Therefore, the studs required for the wall should have a length of approximately 94.875 inches.