With a 120 closed loop gain in the first stage, A pressure transducer must be connected to a boiler. The selected transducer is linear between 100 psi and 1000psi. Specifically, it has the following characteristic: At 100 psi it produces 10 µV, and at 1000 psi it produces 100 µV. The output needs to connected to a 0V - 10V meter so that 100 psi will give a reading of 0V and 1000 psi a reading of 10V. Design a suitable interface using OP AMPs that have a maximum closed-loop gain of 1800 (i.e. each OPAMP has a maximum ACL=1800) Include the Input vs. Output graph.