Register
The load on a bolt consists of an axial pull of 20 KN together with a transverse shear forcer of 10KN Find the diameter of bolt required according to 1 Maximum principal stress theory. 2 Maximum shear
144,881 views
37 votes
37 votes
The load on a bolt consists of an axial pull of 20 KN together with a transverse shear forcer of 10KN Find the diameter of bolt required according to

1 Maximum principal stress theory.

2 Maximum shear stress theory. 3. Maximum principal strain theory.

4 Maximum strain energy theory; and

5. Maximum distortion energy theory.

User Troy Brant
by
2.4k points

1 Answer

14 votes
14 votes

Answer: this took a long time to figure this out, but I got it, so here is the answer

Step-by-step explanation:

The load on a bolt consists of an axial pull of 20 KN together with a transverse shear-example-1
The load on a bolt consists of an axial pull of 20 KN together with a transverse shear-example-2
The load on a bolt consists of an axial pull of 20 KN together with a transverse shear-example-3
The load on a bolt consists of an axial pull of 20 KN together with a transverse shear-example-4
User Jiggy
by
2.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

1.6m questions

2.0m answers

Other Questions

Consider the following chain-reaction mechanism for the high-temperatureformation of nitric oxide, i.e., the Zeldovich mechanism: O + N2------ NO + N Reaction 1 N + O2------ NO + O Reaction 2 A. Write
2. The following segment of carotid artery has an inlet velocity of 50 cm/s (diameter of 15 mm). The outlet has a diameter of 11mm. The pressure at inlet is 110 mm of Hg and pressure at outlet is 95 mm
Hi! Have some points!
Sơ đồ nguyên lý của một hệ thống lạnh
Problem 89:A given load is driven by a 480 V six-pole 150 hp three-phase synchronous motor with the following load and motor data. Determine the voltage E௙ necessary for this operating condition. Note:
Link Copied!