Answer: Describe a Procedure You Should Use to Separate a Mixture of Iron Filings, Water, and Clay.
Step-by-step explanation:
One possible procedure to separate a mixture of iron filings, water, and clay is as follows:
1. Use a magnet to separate the iron filings from the mixture. Place the magnet near the mixture and move it around until the iron filings are attracted to the magnet. Remove the magnet and the iron filings from the mixture.
2. Pour the remaining mixture through a filter to separate the clay from the water. Place a funnel in a flask and insert a filter paper into the funnel. Pour the mixture through the filter paper. The clay will be left behind on the filter paper, while the water will pass through into the flask.
3. To recover the water, heat the flask on a hot plate or other heat source to evaporate the water. Place the flask on a hot plate and heat it until the water has evaporated. The clay will be left behind in the flask.
4. Once the water has evaporated, the clay can be collected from the flask. Scrape the clay out of the flask and store it in a container.
This procedure separates the iron filings, clay, and water from each other by using physical properties such as magnetism and filtration.
{I Hope This Helps! :)}