Register
Steel rods and pipes on which forms are lifted must meet all these requirements EXCEPT: a. They must be encased in concrete. b. They must be adequately braced. c. They must be specifically designed for
202k views
3 votes
Steel rods and pipes on which forms are lifted must meet all these requirements EXCEPT:

a. They must be encased in concrete.
b. They must be adequately braced.
c. They must be specifically designed for that purpose.
d.. They must be physically attached to the forms.

User Nadun
by
8.7k points

1 Answer

4 votes

Answer:

They must be physically attached to the forms

Step-by-step explanation:

User Egli Becerra
by
8.2k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!