Final answer:
When connecting to a TesiraFORTE device, you may need to change the network settings. To do so, access the device maintenance interface and make the desired changes to the IP address, subnet mask, and gateway.
Step-by-step explanation:
To do so, follow these steps:
1. Access the device maintenance interface: Connect your computer or device to the same network as the TesiraFORTE device. Open a web browser and enter the IP address of the TesiraFORTE device in the address bar. This will take you to the device's maintenance interface.
2. Log in: If prompted, enter the appropriate login credentials to access the maintenance interface. This information is usually provided in the device's documentation or by the system administrator.
3. Locate network settings: Once logged in, navigate to the network settings section. This may be labeled as "Network Configuration" or something similar.
4. Make changes to IP address, subnet mask, and gateway: In the network settings section, you will find fields to enter the desired IP address, subnet mask, and gateway. Enter the new values according to your network requirements or as instructed by the system administrator.
5. Save and apply changes: After making the necessary changes, look for a "Save" or "Apply" button in the maintenance interface. Click on it to save the new network settings and apply them to the TesiraFORTE device.
By following these steps, you can access the device maintenance interface of a TesiraFORTE device and modify the network settings, including the IP address, subnet mask, and gateway. These changes allow you to connect and configure the device to suit your network setup.
Your question is incomplete, but most probably the full question was:
(Connecting to TesiraFORTE)⇒ ((Changing Network Settings)) ⇒Device Maintenance
Describe the steps base on the path above