Register
Which Air Force technical order (AFTO) form is used to document each discrepancy discovered by the pilot or maintenance personnel and to document any corrective action you complete to correct a discrepancy?
57.9k views
1 vote
Which Air Force technical order (AFTO) form is used to document each discrepancy discovered by the pilot or maintenance personnel and to document any corrective action you complete to correct a discrepancy?

User Marcuse
by
7.2k points

1 Answer

3 votes

Final answer:

The AFTO Form 781 series is used to document discrepancies and corrective actions in the Air Force.

Step-by-step explanation:

The Air Force technical order (AFTO) form used to document each discrepancy discovered by the pilot or maintenance personnel and to document any corrective action taken is the AFTO Form 781 series. This form is used for maintaining an accurate record of maintenance performed on an aircraft and serves as a logbook for documenting discrepancies and actions taken to rectify them.

Learn more about Air Force technical order form for documenting discrepancies and corrective actions

User Intellidroid
by
9.0k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.1m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Link Copied!