Final answer:
When loading sand from a stockpile into a truck, keep the bucket low to the ground and insert it into the base of the stockpile. Raise the bucket after insertion and level it properly when depositing sand into the truck bed. Ordering sand by cubic yard allows for an efficient and precise measurement for projects.
Step-by-step explanation:
If you are loading sand from a stockpile into a truck, positioning the bucket correctly is critical for efficiency and safety. The loader should approach the stockpile with the bucket positioned low to the ground. This allows the bucket to be inserted into the base of the stockpile without losing any sand during the loading process. Once the bucket is fully inserted into the sand, it is then raised and the loader backs away from the stockpile.
The truck should be positioned close enough to the stockpile that the loader can easily reach over the side to deposit the sand. The bucket should be leveled correctly so that the sand can be unloaded evenly into the bed of the truck, without spilling over the sides or creating an unbalanced load.
Ordering sand by cubic yard is a practical way of measuring large quantities needed for projects. A loader can efficiently scoop up the exact amount required, making the loading process straightforward. This way is more efficient than ordering by weight or the number of grains, as a cubic yard is a standardized measure and can be collected in one loader scoop, depending on the capacity of the loader.