Register
In adverse conditions, how long would it take for a truck to stop?
38.5k views
4 votes
In adverse conditions, how long would it take for a truck to stop?

User Moussa Bistami
by
8.5k points

1 Answer

4 votes

Final answer:

To determine how long it would take for a truck to stop under adverse conditions, we need to consider the distance covered before hitting the brakes, the braking time, and the total stopping distance.

Step-by-step explanation:

In order to determine how long it would take for a truck to stop under adverse conditions, we need to consider a few factors:

  1. The distance the driver covers before hitting the brakes
  2. The time it takes for the truck to stop after hitting the brakes
  3. The total distance the truck covers to stop

Once we have this information, we can calculate the stopping distance.

User Sunghyun Cho
by
7.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Where are all the controls on most circuits?
Link Copied!