Register
When does the "LOW" light on the Total Fuel Indicator appear, LOW FUEL on the WAP appear, and LOW on the Total Fuel Panel appear?
177k views
5 votes
When does the "LOW" light on the Total Fuel Indicator appear, LOW FUEL on the WAP appear, and LOW on the Total Fuel Panel appear?

User Cechode
by
7.7k points

1 Answer

6 votes

Final answer:

The "LOW" light on the Total Fuel Indicator appears when the fuel level in the tank is below a certain threshold, indicating low fuel. Similarly, "LOW FUEL" on the WAP appears when the fuel level is critically low and requires immediate attention. "LOW" on the Total Fuel Panel indicates that the fuel level is below a certain level, signaling the need for refueling.

Step-by-step explanation:

Fuel Indicator Lights

The "LOW" light on the Total Fuel Indicator appears when the fuel level in the tank is below a certain threshold, indicating low fuel. Similarly, "LOW FUEL" on the WAP (Warning and Advisory Panel) appears when the fuel level is critically low and requires immediate attention. Additionally, "LOW" on the Total Fuel Panel indicates that the fuel level is below a certain level, signaling the need for refueling.

Example

As an example, let's say the Total Fuel Indicator has a range from 0 to 100, with 0 indicating empty and 100 indicating full. If the "LOW" light is set to appear at 20, it will illuminate when the fuel level drops below 20, signifying low fuel.

User Mojtaba Roohi
by
7.9k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!