Register
Type L venting systems shall terminate not less than ___ feet above the roof and not less than ___ above any portion of the building within 10 feet.
94.5k views
4 votes
Type L venting systems shall terminate not less than ___ feet above the roof and not less than ___ above any portion of the building

within 10 feet.

User Smali
by
8.5k points

1 Answer

4 votes

Final answer:

Venting systems should terminate at specific distances above the roof and building. Common regulations require termination points to be at least 2 feet above the roof and 3 feet above any portion of the building within 10 feet.

Step-by-step explanation:

In the context of venting systems, Type L venting systems should terminate not less than a certain distance above the roof and any portion of the building within 10 feet. The specific distances depend on the regulations and codes in place, which may vary. However, a common requirement is for the termination point to be not less than 2 feet above the roof and not less than 3 feet above any portion of the building within 10 feet. These guidelines help ensure proper function and safety of the venting system.

User Benderto
by
7.9k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!