Register
According to boiler license law enacted in 1982, who is allowed to fill out an affidavit for a person applying for a second class license or higher , boiler license? a) the employer or a second class engineer
108k views
1 vote
According to boiler license law enacted in 1982, who is allowed to fill out an affidavit for a person applying for a second class license or higher , boiler license?

a) the employer or a second class engineer
b) the applicant
c) any licensed engineer in MN

User Udhay
by
7.9k points

1 Answer

5 votes

Final answer:

The applicant is allowed to fill out an affidavit for a person applying for a second class license or higher boiler license.

Step-by-step explanation:

According to the boiler license law enacted in 1982, the correct answer is b) the applicant. The applicant is allowed to fill out an affidavit for a person applying for a second class license or higher boiler license. This means that the person applying for the license must complete the affidavit themselves.

User Michael Easter
by
8.7k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
A face milling operation is to be performed on cast iron. Tool diameter is 5 inches, w = 2 inches, part length = 8 inches, depth of cut = 0.012 inches, f = 0.001 inch/tooth, and N = 250 RPM. Find: MRR,
A three-point bending test was performed on an aluminum oxide specimen having a circular cross section of radius 3.5 mm (0.14 in.); the specimen fractured at a load of 950 N (215 lbf) when the distance
Homes may be heated by pumping hot water through radiators. What mass of water (in g) will provide the same amount of heat when cooled from 90.7 to 39.4°C, as the heat provided when 182 g of steam is cooled
If a host system is 80% efficient, the minimum horsepower rating of the motor should be ? if the hoist is to provide 20,000 ft-lb/s. a) 45.45hp b) 23,530hp c) 36.36hp d) 42.78hp
Link Copied!