Register
Name common wall framing components.
107k views
5 votes
Name common wall framing components.

User Alex Baban
by
8.7k points

1 Answer

3 votes

Final answer:

Common wall framing components include studs, plates, and headers.

Step-by-step explanation:

Common wall framing components include studs, plates, and headers.

Studs are vertical members used to support the weight of the wall and transfer it to the foundation. They are typically made of wood or metal.

Plates are horizontal members located at the top and bottom of the wall, connecting the studs together. They provide stability to the wall structure.

Headers are horizontal members placed above windows, doors, and other openings to distribute the weight and support the structure above.

User Umut K
by
8.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!