Register
During the review of an A/C records while performing an annual inspection, you discover that the altimeter has not been inspected and tested within the preceding 24 calendar months. if the A/C meets all
229k views
4 votes
During the review of an A/C records while performing an annual inspection, you discover that the altimeter has not been inspected and tested within the preceding 24 calendar months. if the A/C meets all other airworthiness requirements, as the inspection authorization, you should?

User Junjie Wang
by
7.3k points

1 Answer

5 votes

Final answer:

If the altimeter has not been inspected and tested within 24 months during an annual aircraft inspection, the inspection authorization should not be granted.

Step-by-step explanation:

If during an annual inspection of an aircraft, it is discovered that the altimeter has not been inspected and tested within the preceding 24 calendar months, the inspection authorization should not be granted. The altimeter is an essential instrument for determining the altitude of an aircraft, and its proper functioning is crucial for safe operation. Inspections and tests ensure that the altimeter is accurate and reliable. Therefore, it is necessary to comply with the required maintenance and inspection schedules to ensure the airworthiness of the aircraft.

User Conor Boyd
by
8.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!