Register
Protective helmets purchased after 7/25 '94 must comply with ANSI Z89.1-1986 " american national standard A True B False
103k views
0 votes
Protective helmets purchased after 7/25 '94 must comply with ANSI Z89.1-1986 " american national standard

A True
B False

User Vah Run
by
8.0k points

1 Answer

5 votes

Final answer:

False. Protective helmets purchased after 7/25 '94 must comply with ANSI Z89.1-1997 "American National Standard for Industrial Head Protection" (ANSI Z89.1-1997).

Step-by-step explanation:

False. Protective helmets purchased after 7/25 '94 must comply with ANSI Z89.1-1997 "American National Standard for Industrial Head Protection" (ANSI Z89.1-1997). The standard was updated in 1997, not 1986. The purpose of the standard is to establish performance requirements and testing methods for protective helmets to ensure they provide adequate protection to the wearer.

User Kieranpotts
by
8.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!