Register
R-410A requires recovery tanks rated for at least: ______. a) 240 psig b) 300 psig c) 400 psig d) 500 psig
51.3k views
0 votes
R-410A requires recovery tanks rated for at least: ______.

a) 240 psig
b) 300 psig
c) 400 psig
d) 500 psig

User Aj Gu
by
8.7k points

1 Answer

7 votes

Final answer:

R-410A requires recovery tanks to be rated for at least 400 psig to handle its pressure during recovery.

Step-by-step explanation:

The student asked about the required recovery tank rating for R-410A refrigerant. The correct answer is that R-410A requires recovery tanks rated for at least 400 psig.

User Akametta
by
8.6k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
Link Copied!