Register
Explain the characteristics of the CGU-1/B tie-down assembly.
121k views
2 votes
Explain the characteristics of the CGU-1/B tie-down assembly.

User Alberto Moro
by
7.6k points

1 Answer

4 votes

Final answer:

The CGU-1/B tie-down assembly is a high-strength steel component used in aircraft tie-down applications. It consists of a hook, turnbuckle, and strap.

Step-by-step explanation:

Characteristics of the CGU-1/B Tie-Down Assembly

  • The CGU-1/B tie-down assembly is a component used in aircraft tie-down applications.
  • It is made of high-strength steel and consists of a hook, a turnbuckle, and a strap.
  • The hook is attached to the aircraft structure, the turnbuckle is used to adjust the tension, and the strap is used to secure the aircraft.

User Hugo Leao
by
8.3k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.1m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!