Register
List four safety precautions when dealing with pneumatic tools?
77.7k views
0 votes
List four safety precautions when dealing with pneumatic tools?

User Steve Saporta
by
8.1k points

1 Answer

1 vote

Final answer:

Four safety precautions when dealing with pneumatic tools are wearing eye protection, using hearing protection, wearing gloves and goggles, and ensuring ventilation.

Step-by-step explanation:

  1. Wear safety goggles or sunglasses to protect your eyes from injury.
  2. Wear hearing protectors, such as ear plugs, to protect your ears from loud sounds.
  3. Use gloves, goggles, or safety aprons when instructed to do so.
  4. Ensure ventilation and follow manufacturers' instructions when using products or appliances that may release pollutants into the indoor air.
User Sonson
by
8.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!