Register
If you need to cross over an obstacle or bump, What should you do? 1) Slow down and proceed with caution 2) Speed up to quickly clear the obstacle 3) Swerve around the obstacle 4) Stop and wait for the
105k views
5 votes
If you need to cross over an obstacle or bump, What should you do?

1) Slow down and proceed with caution
2) Speed up to quickly clear the obstacle
3) Swerve around the obstacle
4) Stop and wait for the obstacle to be removed

User Nordico
by
7.6k points

1 Answer

3 votes

Final answer:

To cross over an obstacle or bump, the best action is to slow down and proceed with caution. This allows the driver to maintain control of the vehicle and minimize any potential damage or impact from the obstacle. Speeding up or swerving around the obstacle can be dangerous and increase the risk of accidents.

Step-by-step explanation:

When it's necessary to cross over an obstacle or bump, the correct action to take is to slow down and proceed with caution. This allows the driver to maintain control of the vehicle and minimize any potential damage or impact from the obstacle. Speeding up or swerving around the obstacle can be dangerous and increase the risk of accidents.

To cross over an obstacle or bump, the best action is to slow down and proceed with caution. This allows the driver to maintain control of the vehicle and minimize any potential damage or impact from the obstacle. Speeding up or swerving around the obstacle can be dangerous and increase the risk of accidents.

User Benterris
by
8.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.2m questions

11.9m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!