Final answer:
To fly an unmanned aircraft for tower inspection at 46.9N and 98.6W, you must receive ATC authorization and comply with FAA regulations, which may include obtaining a waiver or using the LAANC system.
Step-by-step explanation:
To inspect the tower under construction at the coordinates 46.9N and 98.6W near Jamestown Regional (JMS) using an unmanned aircraft, you must receive authorization from the relevant air traffic control (ATC) service, and comply with Federal Aviation Administration (FAA) regulations. The proximity of the construction site to the airfield may place it within controlled airspace, necessitating further clearances. Depending on the airspace classification, this may involve obtaining a waiver, securing permission through the FAA's Low Altitude Authorization and Notification Capability (LAANC) system, or following other specific guidelines related to drone operations.
Given the potentials for 24-hour monitoring and the necessity to avoid hazards such as surface-to-air missile (SAM) sites, a processing equipment support facility, and airfields with military aircraft, it is crucial that all regulations and restrictions are followed to ensure safe and legal flight operations.
This authorization is often referred to as a Part 107 drone license, which allows you to operate a drone for commercial purposes. To obtain this license, you need to pass a knowledge test administered by the FAA. Once you have the license, you can fly your unmanned aircraft in the designated airspace.
In addition to the FAA authorization, it is also important to be aware of any local regulations or restrictions that may apply to flying drones in the area. Familiarize yourself with any specific rules that may be in place to ensure safe and legal operations.