Register
Firecode C Core gypsum panels are available in lengths of _____ feet. A. 8, 9, 10, 12 B. 8, 10, 14, 16 C. 8, 9, 10, 12, 14 D. 9, 10, 12, 14
18.4k views
1 vote
Firecode C Core gypsum panels are available in lengths of _____ feet.

A. 8, 9, 10, 12
B. 8, 10, 14, 16
C. 8, 9, 10, 12, 14
D. 9, 10, 12, 14

User Padis
by
7.7k points

1 Answer

3 votes

Final answer:

Firecode C Core gypsum panels come in lengths of 8, 9, 10, and 12 feet, which are typical sizes used in building construction to meet various structural requirements.

Step-by-step explanation:

Firecode C Core gypsum panels are available in lengths of 8, 9, 10, and 12 feet. These measurements correspond to various building requirements and dimensions that may be encountered in construction projects. These panels can be utilized in the construction of walls or ceilings where fire-resistance ratings are necessary, as they are embedded with glass fibers to increase their fire resistance.

When considering their lengths, the correct options are 8, 9, 10, and 12 feet; thus, the answer to the question is A. 8, 9, 10, 12 feet. These standard lengths allow builders and contractors to meet different structural and design needs effectively in residential and commercial constructions.

User Instantsetsuna
by
7.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!