Register
Technician A says it is acceptaBle to use Brake cleaner to clean throttle Bodies. Technician B says it is acceptaBle to mix DOT 5 Brake fluid with DOT 3 Brake fluid. Who is right? A) A only B) B only C)
159k views
4 votes
Technician A says it is acceptaBle to use Brake cleaner to clean throttle Bodies. Technician B says it is acceptaBle to mix DOT 5 Brake fluid with DOT 3 Brake fluid. Who is right?

A) A only
B) B only
C) Both A and B
D) Neither A nor B

User Jared Goguen
by
8.6k points

1 Answer

3 votes

Final answer:

Technician A and Technician B are both incorrect. It is not acceptable to use Brake cleaner to clean throttle bodies, and it is not acceptable to mix DOT 5 Brake fluid with DOT 3 Brake fluid.

Step-by-step explanation:

Technician A and Technician B are both incorrect.

Firstly, it is not acceptable to use Brake cleaner to clean throttle bodies. Brake cleaner is specifically formulated to clean brake parts and should not be used on the throttle body, as it can cause damage to the delicate components.

Secondly, it is not acceptable to mix DOT 5 Brake fluid with DOT 3 Brake fluid. DOT 5 brake fluid is silicone-based, while DOT 3 brake fluid is glycol-based. These two types of brake fluid should never be mixed as they have different chemical properties and can cause brake system failure.

User Setanta
by
7.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.1m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
Vitrification is a process of: a. Chemical reaction bonding of aggregate ceramic powder b. Cementing aggregate ceramic powder with a liquefied material c. Solid-state diffusion of aggregate ceramic powder
A 200 g projectile is fired with a velocity of 900 m/s toward the center of a 15 kg wooden block which rests on a rough surface. If the projectile penetrates and emerges from the back at a velocity of
The pressure at any point in a static fluid depends only on the Select one a)- depth, surface pressure, and specific weight. b)- specific weight. c)- surface pressure and depth. d)- depth and container
Link Copied!