Register
Cirrus SR20/22/22T: a) Has a constant slope from top of fuselage to base of vertical stabilizer. b) Has a sudden drop from top of fuselage to base of vertical stabilizer. c) Has a curvy fuselage similar
54.8k views
2 votes
Cirrus SR20/22/22T:

a) Has a constant slope from top of fuselage to base of vertical stabilizer.
b) Has a sudden drop from top of fuselage to base of vertical stabilizer.
c) Has a curvy fuselage similar to PA-28 Cherokee.
d) Has a straight and flat fuselage design.

User Gbaor
by
8.3k points

1 Answer

3 votes

Final answer:

The Cirrus SR20/22/22T aircraft have a curvy fuselage similar to the PA-28 Cherokee, aligning with option c) in the question.

The correct option is c.

Step-by-step explanation:

The Cirrus SR20/22/22T aircraft have an exterior design characteristic that can be described as follows: they do not have a constant slope from the top of the fuselage to the base of the vertical stabilizer, nor do they exhibit a sudden drop in this area.

Instead, the fuselage design is more comparable to a PA-28 Cherokee, which is known for its curvy fuselage.

Therefore, the correct answer to the question would be option c) Has a curvy fuselage similar to PA-28 Cherokee.

The correct option is c.

User Abhirup Das
by
8.4k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!