Register
After a compressor burnout, temporarily install a new__ to protect the compressor for the duration of the cleanup A) Liquid line filter drier B) Expansion valve C) Pressure relief valve D) Evaporator coil
208k views
0 votes
After a compressor burnout, temporarily install a new__ to protect the compressor for the duration of the cleanup

A) Liquid line filter drier
B) Expansion valve
C) Pressure relief valve
D) Evaporator coil

User Overhed
by
8.7k points

1 Answer

2 votes

Final answer:

To protect the compressor after a burnout, a new liquid line filter drier should be temporarily installed during the cleanup.

Step-by-step explanation:

After a compressor burnout, temporarily install a new liquid line filter drier to protect the compressor for the duration of the cleanup. A liquid line filter drier is a component that removes moisture, debris, and contaminants from the refrigerant in the system, preventing damage to the compressor.

User Vishal Kharde
by
9.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.3m questions

12.0m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!