Register
The two units needed to implement R-format ALU operations: A) ALU and Control Unit B) Cache and Memory Unit C) Instruction Fetch and Decode D) Input/Output Unit and RAM
145k views
1 vote
The two units needed to implement R-format ALU operations:

A) ALU and Control Unit
B) Cache and Memory Unit
C) Instruction Fetch and Decode
D) Input/Output Unit and RAM

User Davie
by
8.6k points

1 Answer

6 votes

Final answer:

The two units needed to implement R-format ALU operations are the ALU and Control Unit.

Step-by-step explanation:

The two units needed to implement R-format ALU operations are the ALU (Arithmetic Logic Unit) and the Control Unit.

The ALU is responsible for performing arithmetic and logical operations, such as addition, subtraction, and bitwise operations. It operates on the data stored in registers.

The Control Unit coordinates the operations of the ALU and other components of the CPU, ensuring that instructions are executed in the correct sequence.

User Dimitris Siakavelis
by
8.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Where are all the controls on most circuits?
Link Copied!