Register
The minimum aisle width in a Type II bus is _____ inches. A. 13 B. 9 C. 11"
136k views
3 votes
The minimum aisle width in a Type II bus is _____ inches.

A. 13
B. 9
C. 11"

User FaNaJ
by
8.3k points

1 Answer

2 votes

Final answer:

The minimum aisle width in a Type II bus is 12 inches according to transportation guidelines for safety and accessibility.

Step-by-step explanation:

The minimum aisle width in a Type II bus is 12 inches. This requirement is specified to ensure safe and efficient evacuation in case of an emergency and also to provide adequate space for movement within the bus. Regulations for vehicle standards can be found within the guidelines set by the Department of Transportation or other relevant transportation authorities.

User Craig McGuff
by
8.9k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!