Question

If you saw the following command line, what would you be capturing?

tcpdump -i eth2 host 192.168.10.5

O Traffic just from 192.168.10.5
O All traffic other than from 192.168.86.5
O Traffic just to 192.168.10.5
O Traffic to and from 192.168.10.5

Answer 1

Option D: Using the command 'tcpdump -i eth2 host 192.168.10.5', you would capture traffic going both to and from the IP address 192.168.10.5 on the network interface eth2.

Step-by-step explanation:

If you saw the command line with tcpdump -i eth2 host 192.168.10.5, you would be capturing all traffic to and from the host 192.168.10.5. This includes any inbound or outbound packets where the source or destination IP address is 192.168.10.5. The tcpdump utility is a network sniffer that is used to capture and display the contents of network packets that match the criteria specified in its command line arguments. In this case, 'eth2' specifies the network interface to listen on, while 'host 192.168.10.5' specifies that you want to capture packets associated with the particular host IP.

The command line tcpdump -i eth2 host 192.168.10.5O captures traffic just to 192.168.10.5.

Tcpdump is a command-line tool for capturing and analyzing network traffic. In this case, the command is set to capture traffic only from a specific host with the IP address 192.168.10.5 and using the network interface eth2.

This can be useful for monitoring and analyzing network traffic for troubleshooting or security purposes.