Register
When MIG welding, the flow meter on your bottle gauge should be set at approximately _____ to _____ cubic feet per hour.
75.1k views
2 votes
When MIG welding, the flow meter on your bottle gauge should be set at approximately _____ to _____ cubic feet per hour.

User Also
by
8.2k points

1 Answer

4 votes

Final answer:

When MIG welding, the flow meter should be set at approximately 10 to 40 cubic feet per hour.

Step-by-step explanation:

When MIG welding, the flow meter on your bottle gauge should be set at approximately 10 to 40 cubic feet per hour.

User Jonathan Michalik
by
7.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Teresa is emotionally volatile, particularly with friends and boyfriends. She is extremely dramatic about even the smallest disappointments and is sexually and behaviorally very impulsive. Teresa would
A 200 g projectile is fired with a velocity of 900 m/s toward the center of a 15 kg wooden block which rests on a rough surface. If the projectile penetrates and emerges from the back at a velocity of
A three-point bending test was performed on an aluminum oxide specimen having a circular cross section of radius 3.5 mm (0.14 in.); the specimen fractured at a load of 950 N (215 lbf) when the distance
Link Copied!