Register
The overcurrent protection device for a Class 1 Circuits may be rated to ________. 1) 70 2) 80 3) 90 4) 100
97.2k views
4 votes
The overcurrent protection device for a Class 1 Circuits may be rated to ________.

1) 70
2) 80
3) 90
4) 100

User Stenehall
by
7.7k points

1 Answer

3 votes

Final answer:

The overcurrent protection device for a Class 1 Circuit may be rated to 100.

Step-by-step explanation:

The overcurrent protection device for a Class 1 Circuit may be rated to 100.

User Cedric Mamo
by
8.3k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
A 200 g projectile is fired with a velocity of 900 m/s toward the center of a 15 kg wooden block which rests on a rough surface. If the projectile penetrates and emerges from the back at a velocity of
The pressure at any point in a static fluid depends only on the Select one a)- depth, surface pressure, and specific weight. b)- specific weight. c)- surface pressure and depth. d)- depth and container
A face milling operation is to be performed on cast iron. Tool diameter is 5 inches, w = 2 inches, part length = 8 inches, depth of cut = 0.012 inches, f = 0.001 inch/tooth, and N = 250 RPM. Find: MRR,
Link Copied!