Register
Which of the following consists of a top rail, midrail, and posts; must be 42 inches in height from the upper surface of the top rail to the floor and a midrail height of 21 inches? 1) Staircase 2) Balcony
217k views
1 vote
Which of the following consists of a top rail, midrail, and posts; must be 42 inches in height from the upper surface of the top rail to the floor and a midrail height of 21 inches?

1) Staircase
2) Balcony
3) Handrail
4) Fence

User Tayacan
by
8.3k points

1 Answer

6 votes

Final answer:

A handrail consists of a top rail, midrail, and posts. It is typically found on stairs, balconies, or elevated areas to provide support and safety.

Step-by-step explanation:

The subject of this question is handrail.

A handrail typically consists of a top rail, midrail, and posts. It is designed to provide support and safety for people walking along a staircase, balcony, or any elevated area

According to the question, a handrail must be 42 inches in height from the upper surface of the top rail to the floor, with a midrail height of 21 inches.

User CannibalSmith
by
8.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.5m questions

12.2m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!