Register
What type of lights should not be used due to their intensity? 1) Unfocused lights 2) Focused lights 3) Red or green runway course lights 4) TV or radio tower obstruction lights
118k views
1 vote
What type of lights should not be used due to their intensity?

1) Unfocused lights
2) Focused lights
3) Red or green runway course lights
4) TV or radio tower obstruction lights

User Carlo Zanocco
by
7.5k points

1 Answer

5 votes

Final answer:

Focused lights should not be used due to their intensity

Step-by-step explanation:

The type of lights that should not be used due to their intensity are focused lights. Focused lights have a concentrated beam that can be very bright and intense. This can cause discomfort and potentially damage to the eyes. It is important to use lights that are properly diffused and not overly focused to ensure a comfortable lighting environment.

User Ilinca
by
7.5k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.4m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
In solid motors, HTPB and PBAN are two common types of plasticizers. a) True b) False
Link Copied!