Question

List and describe three front panel connectors you will likely see going from the front panel to the motherboard.

Answer 1

Three common front panel connectors are the Power Switch Connector, which allows the power button to turn the computer on or off, the Reset Switch Connector, which enables the reset button to reboot the system, and the USB Connector, which connects the case's USB ports to the motherboard.

Step-by-step explanation:

When assembling a computer, you will often connect several front panel connectors from the case to the motherboard to enable functionality for various controls and ports located on the front of the case. Three common connectors include:

1. Power Switch Connector: This small group of wires and a connector is used to attach the case's power button to the motherboard. When you press the power button on the case, it sends a signal through this connector to turn the computer on or off.
2. Reset Switch Connector: Similar to the power switch, the reset switch connector allows the computer's reset button to restart the system without turning the power off. This is useful for troubleshooting or when the computer is unresponsive.
3. USB Connector: These connectors attach the USB ports of the case's front panel to the motherboard, allowing devices to be connected via USB to the front of the computer. USB connectors usually follow the USB 2.0, USB 3.0, or newer standards depending on the motherboard and case.

Each connector is marked with a small label such as PWR, RESET, or USB to indicate its function and facilitate the correct connection to the pin headers on the motherboard.