Question

You are replacing the Mobile Broadband antennas in an HP business notebook. What should you consider when performing this type of service procedure?

(Select two.)
A. Make careful note of the antenna routing, and ensure connection to the correct wireless module.
B. You should never tug or bend the antennas during removal or replacement.
C. You should reseat the Mobile Broadband module when replacing the antennas.
D. You must replace both the Mobile Broadband module and the antennas at the same time.
E. Always handle the antennas by the connector and not by the wires.

Answer 1

When performing a service procedure to replace Mobile Broadband antennas in an HP business notebook, note the antenna routing and connect to the appropriate wireless module, and handle the antennas gently, especially by the connector. Do not bend or tug the antennas, and reseat the module only if necessary.

Step-by-step explanation:

When replacing the Mobile Broadband antennas in an HP business notebook, there are several considerations to ensure the procedure is performed correctly. First, it is important to make careful note of the antenna routing, and ensure that each antenna is connected to the correct wireless module, to maintain optimal signal reception and performance.

Additionally, antennas can be sensitive and delicate; thus, one should never tug or bend them during removal or replacement. Instead, handle the antennas gently, especially by the connectors rather than the wires, to prevent damage. It's not necessary to replace both the Mobile Broadband module and the antennas at the same time unless they are both defective or being upgraded.

The focus should be on the antennas themselves if that's the only component being replaced. Furthermore, while it's always a good practice to make sure that everything is seated properly, reseating the Mobile Broadband module is only required if there is an issue with connectivity that suggests it has become loose or improperly seated.