Register
According to NFPA, what is the minimum flow required on an aerial device? A. 750 gpm (2839 L/min) B. 1000 gpm (3785 L/min) C. 1250 gpm (4732 L/min) D. 1500 gpm (5678 L/min)
88.7k views
0 votes
According to NFPA, what is the minimum flow required on an aerial device?

A. 750 gpm (2839 L/min)
B. 1000 gpm (3785 L/min)
C. 1250 gpm (4732 L/min)
D. 1500 gpm (5678 L/min)

User Mbesson
by
7.0k points

1 Answer

3 votes

Final answer:

The NFPA requires a minimum flow of 1000 gpm (3785 L/min) on an aerial device.

Step-by-step explanation:

The NFPA (National Fire Protection Association) requires a minimum flow of 1000 gpm (3785 L/min) on an aerial device. This means that the aerial device must be capable of delivering at least 1000 gallons per minute or 3785 liters per minute of water flow.

The minimum flow requirement is important to ensure adequate firefighting capabilities when using the aerial device.

User Balaji Viswanath
by
8.1k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

8.8m questions

11.4m answers

Other Questions

4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Where are all the controls on most circuits?
Link Copied!