Register
Shielded metal arc welding can be used to weld all ferrous and nonferrous metals T/F
27.1k views
1 vote
Shielded metal arc welding can be used to weld all ferrous and nonferrous metals T/F

User Vinod Tigadi
by
7.8k points

1 Answer

6 votes

Final answer:

Shielded metal arc welding can be used to weld both ferrous and nonferrous metals.

Step-by-step explanation:

Shielded metal arc welding (SMAW) is a type of welding process that can be used to join both ferrous and nonferrous metals. This process involves the use of a consumable electrode coated with a flux. The flux creates a shielding gas that protects the weld puddle from atmospheric contamination. SMAW is commonly used for welding steel, stainless steel, cast iron, and some nonferrous metals like aluminum and copper.

User Hugh Buchanan
by
7.8k points
Ask a Question
Welcome to QAmmunity.org, where you can ask questions and receive answers from other members of our community.

9.4m questions

12.1m answers

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!