Final answer:
To access any input to any fader on the Tascam M-3500, a user must use the routing matrix or assign section to connect inputs to channel faders. This is essential for managing complex mixes especially with channels. Precise methods are detailed in the Tascam M-3500 manual, and understanding the signal flow is crucial for effective use.
Step-by-step explanation:
The Tascam M-3500 console, which is a part of audio engineering equipment, gives users the ability to route any input to any fader. This means you can control various input signals through different channels. Although I cannot give step-by-step instructions since I do not have direct experience with this specific model, a user typically accesses inputs through the routing matrix or assigns section of the mixer. Each channel strip would likely have a button or selector to assign different inputs to that channel's fader.
For someone working with channels or inputs, this feature is extremely helpful for managing a complex mix. The correct method would involve a combination of patching inputs in the input section and then using assignment switches or routing matrix to send that input to the desired fader/channel. It's imperative to refer to the Tascam M-3500's manual for precise operation instructions related to input routing and fader assignment.
To effectively manage such a routing task on a larger console, an understanding of the signal flow and routing capabilities of the board is essential. Properly setting up and using a routing matrix can simplify this process, and it usually offers the flexibility required to manage multiple inputs and outputs. This functionality is typical in studio or live sound environments where the management and control of various audio sources are necessary.