Question

You are the IT security administrator for a small corporate network. You need to increase the networking closet's security by implementing a CCTV system with IP cameras. As part of this task, you need to separate the CCTV data traffic on the network using a separate VLAN on the switch. What is the first step you should take to implement the CCTV system?

1) Access the switch management console from ITAdmin using the provided credentials
2) Connect the IP cameras to the RJ-45 ports on the camera mount in the lobby and networking closet
3) Configure the DHCP server to provide IP addresses to the camera and the laptop
4) Mount the IP cameras on the wall plate in the lobby and networking closet

Answer 1

The first step to implementing the CCTV system is to connect the IP cameras. Then, access the switch management console and configure a separate VLAN for the CCTV data traffic. Finally, mount the IP cameras on the wall plate.

Step-by-step explanation:

The first step you should take to implement the CCTV system is to connect the IP cameras to the RJ-45 ports on the camera mount in the lobby and networking closet. This step ensures that the cameras are physically connected to the network.

Once the cameras are connected, you can then proceed to access the switch management console using the provided credentials. From the switch management console, you can configure a separate VLAN for the CCTV data traffic. This will separate the CCTV traffic from other network traffic and enhance security.

After configuring the VLAN, you can then mount the IP cameras on the wall plate in the lobby and networking closet. This step ensures that the cameras are securely installed and positioned.